DIN abrasion tester TDAT-A10 Catalog

Overview

DIN abrasion tester TDAT-A10 determines abrasion resistance of rubber made products, natural rubber, vulcanized rubber, thermoplastic amorphous polymers to withstand the long term damage as a result of friction due to its excessive use. The ratio between standard loss of rubber material & test rubber material, expressed in percentage, marks the abrasion resistance index of sample under test.

Features :

Automatic electric lock for the rotating cylinder
Mechanical unlocking of the cylinder for easy abrasive replacement
Screw for adjustment of abrasion specimen
Enables control uniformity of specific material
Machine with metallic base plate, polished paint & zinc coating
High quality machine design with reproducible results
Easy to operate

Specifications :

Test arm weight	2.5 N
Additional Loads	2.5 ± 0.1 N, 5 ± 0.1 N, 10 ± 0.1 N,
Idler	150 mm
Abrasion stroke	40 ± 0.2 M
Horizontal displacement	4.2 mm/ rotation
Stroke	20 m/ 40 m presetting
Grips lateral displacement	4.2 ± 0.04 mm/ rotation
Idler wheel speed	40 ± 1 rpm
Measurement mode	Auto/ manual presetting
Specimen size	Diameter 16 mm, thickness at least 6 mm
Emery cloth specifications	60 # seam is less than 2 mm
Shift screw	6 teeth/ inch
Limit rotation	85 rotate
Set rotation	84 rotation of 40 meters
Return form	Electric automatic reset
Net Weight	75 kg
Dimension	950 × 660 × 310 mm
Control temperature range
Temperature tester
Temperature display resolution
Temperature control accuracy
Calibration accuracy
Rotor speed
Die cavity frequency
Sway angle
Air compression
Ambient temperature
Test result
Display
Speed accuracy
Torque range
Torque resolution
Printer connection
Content printed
Product dimension
Weight
Power supply	220 V, 50 / 60Hz

Applications :

DIN abrasion tester is used to determine the abrasion resistance of elastomers by the frictional loss of the rubber in products such as tires, conveyor belts, hoses, footwear, floor covering, thermoplastic amorphous polymers etc.